|
|
02. SetupTable of contents
From WwwWhat do you need ?Access Point (AP)
Access PointCan use linux box with right card and software (http://oob.freeshell.org/nzwireless/LWAP-HOWTO.html) I have not tried this. WRT54G You must buy the correct model!!! Can run Linux. Can be "exteneded" but adding hardware, requires sodering Wireless RouterWhat is the differance between a "Wireless Access Point" and A "Wireless Router" ? Features Card/USB Dongle/?There a lots of choices. But it can be difficult to find one that is supported by Linux. Often there are issues with N.D.A.'s and device drivers, so drivers are not written.AntennasReally only needed if you are extending rage. Most equipment for in home, or in building networks should be fine with the antennas they come with. If you intened to add an antenna you need to be sure the equipment you buy has the ability to add an antenna. Ebay has been where I have bought equipment antenna's and connectors. Polarity can be is an issue with antennas Other EquipmentThere are several other pices of equipment that can be useful. Wireless Bridge, this would give you the ability to add another wired network to a wireless network. Passive repeater, allow you to extend your range, or Plug it togetherNeed to pay attention to where you place it to get best coverage. Some device can use POE, can be useful for remote connections If using Antenna try and have the cable as short as possible Configure Access pointBasic configdepends on your access point and what you want it to do need to know how you want it to fit into your network SecurityOld WEP 64/128 - has been broken. Should use WAP2 |
| |